Mud Kit and Diamond plate??

sdgood1 · 05-11-2009, 11:36 PM

Hey all. Looking for some alum. Diamond plate to make a hard top. Looking for a 5'x10' sheet of 14 or 16 Ga. Any idea of where in AZ.

? Has anybody else made a solid top

What thickness did you use or do you THINK would be strong enough without to much weight

? Any ideas or suggestions are greatly appreciated. Hopefully have some left over for floor boards.

Ordered the mud kit from DJ Fab. Will post how it works and also if it helps with the dust at all (I hope!!) All of us that ride in AZ. know how dusty it is!!!!!!!!!

RDB · 05-12-2009, 05:47 PM

Industrial material supply 48st and Broadway They will have what u want and can bend it for you cheap .083 for my full cage was 52.00 for a piece 4'11'' x6'1''

ALAG3 · 05-12-2009, 07:02 PM

I would love a top on mine, just don't want to part with the money!!

sdgood1 · 05-13-2009, 09:06 PM

Thanx for the info!!!!!!!! I'll make some calls

sdgood1 · 05-13-2009, 09:15 PM

HEY RDB, Do you have a Phone # for that industrial material supply

?? I'm up in Chino Valley and can't find them on the web

Or an exact street address?? That is about the same size I'm looking for
Thanx in advance

sdgood1 · 05-24-2009, 11:53 PM

Just recieved my mud kit. WOW All around a great looking kit!!!!!! I haven't found time to install, but it's ALL there and it sits right in place and doesn't look like it will take more than a couple hours to install. I'll post more about the install, if I ever get time off to do that. Just looks like really good service and quality.
Thanks DJFAB

sdgood1 · 06-06-2009, 10:34 PM

GOT it installed!!!! What a great quality kit. Fit perfect and came with all the parts to install it, including a drill bit needed for some of the self tapping bolts!!!!!!!! Installing the pieces behind the tank and tool box was easy. Putting the pieces on the bottom of the bed was a little more challenging, but doable. Stripped a couple of the bolts trying to use the existing holes in the bed, but they were not consistant so I drilled them out with the drill supplied, put a drop of oil on the self tappers and had no more problems. It looks great and is super functional. Took it out on a hot day and did NOT notice any difference in temps, the fan did not seem to run any more often. One extra perc for the AZ. rider, I feel that it helped with the amount of dust that filters into the engine compartment and around the back of the seat. I'll know more after getting it in some REAL dirt soon. I'd highly reccomend this if your doing any muddin at all

ALAG3 · 06-07-2009, 06:34 AM

We want PICTURES!

sdgood1 · 06-07-2009, 11:55 AM

I'll try

ASAP
It really looks good

ALAG3 · 06-07-2009, 12:24 PM

Cool, I have been considering the mud kit for mine.

05-11-2009, 11:36 PM	#1
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Mud Kit and Diamond plate?? Hey all. Looking for some alum. Diamond plate to make a hard top. Looking for a 5'x10' sheet of 14 or 16 Ga. Any idea of where in AZ.? Has anybody else made a solid top What thickness did you use or do you THINK would be strong enough without to much weight? Any ideas or suggestions are greatly appreciated. Hopefully have some left over for floor boards. Ordered the mud kit from DJ Fab. Will post how it works and also if it helps with the dust at all (I hope!!) All of us that ride in AZ. know how dusty it is!!!!!!!!! __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

05-12-2009, 05:47 PM	#2
RDB Member Join Date: Mar 2009 Posts: 42	Re: Mud Kit and Diamond plate?? Industrial material supply 48st and Broadway They will have what u want and can bend it for you cheap .083 for my full cage was 52.00 for a piece 4'11'' x6'1'' __________________ 2008 xp full cage supertrapp exhaust fuel controler dirty dawg clutch DWT beadlocks with bighorns

05-12-2009, 07:02 PM	#3
ALAG3 Senior Member Join Date: Dec 2007 Posts: 348	Re: Mud Kit and Diamond plate?? I would love a top on mine, just don't want to part with the money!! __________________ Adam 2008 Polaris 700XP Turbo Silver edition

05-13-2009, 09:06 PM	#4
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Re: Mud Kit and Diamond plate?? Thanx for the info!!!!!!!! I'll make some calls __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

05-13-2009, 09:15 PM	#5
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Re: Mud Kit and Diamond plate?? HEY RDB, Do you have a Phone # for that industrial material supply?? I'm up in Chino Valley and can't find them on the web Or an exact street address?? That is about the same size I'm looking for Thanx in advance __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

Mud Kit and Diamond plate??

2008 polaris ranger diamond plate floor

5' by 10' diamond plate in az

diamond plate top for polaris ranger

dj fab.mud kit

djfab mud kit

hopfab enterprises polaris

hopfabs enterprise

polaris ranger diamond plate

polaris ranger diamond plate tops

polaris ranger mud kit

05-24-2009, 11:53 PM	#6
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Re: Mud Kit and Diamond plate?? Just recieved my mud kit. WOW All around a great looking kit!!!!!! I haven't found time to install, but it's ALL there and it sits right in place and doesn't look like it will take more than a couple hours to install. I'll post more about the install, if I ever get time off to do that. Just looks like really good service and quality. Thanks DJFAB __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

06-06-2009, 10:34 PM	#7
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Re: Mud Kit and Diamond plate?? GOT it installed!!!! What a great quality kit. Fit perfect and came with all the parts to install it, including a drill bit needed for some of the self tapping bolts!!!!!!!! Installing the pieces behind the tank and tool box was easy. Putting the pieces on the bottom of the bed was a little more challenging, but doable. Stripped a couple of the bolts trying to use the existing holes in the bed, but they were not consistant so I drilled them out with the drill supplied, put a drop of oil on the self tappers and had no more problems. It looks great and is super functional. Took it out on a hot day and did NOT notice any difference in temps, the fan did not seem to run any more often. One extra perc for the AZ. rider, I feel that it helped with the amount of dust that filters into the engine compartment and around the back of the seat. I'll know more after getting it in some REAL dirt soon. I'd highly reccomend this if your doing any muddin at all __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

06-07-2009, 06:34 AM	#8
ALAG3 Senior Member Join Date: Dec 2007 Posts: 348	Re: Mud Kit and Diamond plate?? We want PICTURES! __________________ Adam 2008 Polaris 700XP Turbo Silver edition

06-07-2009, 11:55 AM	#9
sdgood1 Junior Member Join Date: Mar 2009 Posts: 12	Re: Mud Kit and Diamond plate?? I'll try ASAP It really looks good __________________ Steve & Dee 08 XP, LOTS of goodies Propeople, antipolitician

06-07-2009, 12:24 PM	#10
ALAG3 Senior Member Join Date: Dec 2007 Posts: 348	Re: Mud Kit and Diamond plate?? Cool, I have been considering the mud kit for mine. __________________ Adam 2008 Polaris 700XP Turbo Silver edition

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have any experiance with the accutronix rear brace & license plate	Scooby	Full Size Ranger Discussion	0	02-21-2010 02:43 PM
Idaho's new restricted vehicle plate for UTV's & ATV"	ELK_HUN10	North West Chapter	0	04-16-2009 12:34 PM
Billet License plate holder	jimmyjam	Full Size Ranger Discussion	4	01-22-2008 09:31 AM