power problem

[sears]

I have a xp 700 2006 i have had a problem with the belts the seem toget hot and glazed all the way arround. the clutches and motor mounts are good . My last belt was a dayco 700 wide wich made it hard to shift into gear and ot seemed to loose power in the lower end. I changed the belt to a standard on yesterday and it made it better to shift but i still lack power when i leave at a dead stop. What can it be

[caglezxj]

Well almost all rangers at a dead stop and punch the gas it doesn't do as well as starting off slower then punch it. www.dirtydawgperformance.com is one of our sponsors. He offers several performance upgrades at a low price. Plus he can tell you what all you can do to make your ranger run better.

Josh

[sears]

thanks i will check it out it just seemed to have had bit less power.

[rose]

The dealer told me not to operate the machine at slow speed in high range. There is not enough air going around the belt to keep it cool. The machine is made to run in low range.