Part numbers Polaris doesn't want you to have LOCATED!!!

[Kid Dynomite]

The following are part numbers for the Plugs and connectors, seals and cavity plugs for the ECM found on the 05/06 700 Ranger XP's. With these part numbers you can have a pig-tail put together so you can replace the burnt plugs and or wires on these models without buying a whole wiring harness from Polaris. These are Delphi/Packard part numbers. I located a company in Texas called Mouser Eletronics www.mouser.com that sold me these items as I needed not just bulk sales only. They shipped same day and had great service. I hope this helps fellow PRC members who have had ECM and burned plug and or wire issues like I did.



The 16 pin plug - 15326666

The 14 pin Plug - 15326917

Connectors Pins for inside of Plugs - 15304718

Seals for the Plugs - 12191221 or 15366066 Note: you can use either one depending on supplier's stock.

Cavity Plugs for the Plug - 15305170

[GRAZOR]

Thanks Kid Dynomite.

This is exactly the type of info we love to see and we also need to have a good place to store info like this for future reference.

It is very painful to have to buy a complete harness just because a connector went bad or got melted or broke.

In my other hobby, Vintage Audio, we have lots of this info for these rediculously inexpensive parts but if you can't find the one you need then most times the gear is pretty useless.

I don't think we need a sticky on this Josh but it might be a good idea to make a place to put this type of info, something like a "Hard to Find" section that only you and the Mods can send things to but everyone can read. I can think of quite a few posts that have such info and invaluable parts references and vendors that should have been saved.

Gary

[caglezxj]

Originally Posted by Kid

I hope this helps fellow PRF members who have had ECM and burned plug and or wire issues like I did.

Fixed it for you....