|
|
This is a discussion on Installing a new drive belt within the General Discussion forums, part of the Polaris Ranger Forum category; Thought I should carry a spare drive belt, so I picked up a new one at the dealer. I asked if I need and clutch ...
|
|||||||
| General Discussion Talk about anything here. |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
08-23-2008, 04:05 PM
|
#1 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Installing a new drive belt
Thought I should carry a spare drive belt, so I picked up a new one at the dealer. I asked if I need and clutch pullers to put the new belt on
 ? He said I could move the clutches by hand to get the belt on. Is it this easy??I have yet to find any thing on the 1999 Ranger 6x6 with the 500 motor easy to work on. Any tips, tricks and write ups would be great, thanks. |
|
|
 |
|
08-23-2008, 04:49 PM
|
#2 |
|
Administrator
Join Date: Dec 2007
Posts: 2,313
 |
Re: Installing a new drive belt
If it is like the 700 Ranger It was just removing the cover, rolling it over the small pulley first. Then to install put it on the large pulley first then roll it over the small pulley. I did a write up on it. It was easy.
Josh
__________________
|
|
|
|
|
08-24-2008, 08:36 AM
|
#3 |
|
Senior Member
Join Date: Dec 2007
Posts: 348
|
Re: Installing a new drive belt
I agree, easy to change. Can be done in the woods with a few tools....
__________________
Adam 2008 Polaris 700XP Turbo Silver edition 
|
|
|
|
|
08-24-2008, 10:57 AM
|
#4 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Re: Installing a new drive belt
Easy, that is good news. I did a search, but nothing came up. I will hunt for the write up.
|
|
|
|
|
08-24-2008, 01:16 PM
|
#5 |
|
Administrator
Join Date: Dec 2007
Posts: 2,313
|
Re: Installing a new drive belt
here is the link: http://polarisrangerforum.com/index.php?topic=582.0
__________________
|
|
|
|
|
08-26-2008, 03:26 AM
|
#6 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Re: Installing a new drive belt
Cool, thanks.
|
|
|
|
|
08-27-2008, 04:35 PM
|
#7 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Re: Installing a new drive belt
So I finally got the bolts out of the guard, but I think the 6x6 was built around the guard. I haven't found the combination on how to get the guard out yet
 
|
|
|
|
|
08-27-2008, 11:03 PM
|
#8 |
|
Administrator
Join Date: Dec 2007
Posts: 2,313
|
Re: Installing a new drive belt
Twist turn and pull! if it is anything like the RZR it is a pain. Plus one down side to the RZR is it has no drain plug andif it did you couldn't get to it.
__________________
|
|
|
|
|
08-28-2008, 06:08 PM
|
#9 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Re: Installing a new drive belt
I'm in the process of taking the seats out so I can get the center console out. Then maybe it will come out the top since I need to check and clean the new fuel filter also.
|
|
|
|
|
08-29-2008, 08:13 PM
|
#10 |
|
Senior Member
Join Date: Dec 2007
Posts: 269
|
Re: Installing a new drive belt
So I got the new belt on and I was reading the on line manual and since I am saving the old belt for a spare. The manual said to mark your old belt so if you use it again, you install it in the same direction as it was in.
Just thought I would post a note on that since there were others talking about carrying a spare belt. |
|
|
|
|
Lower Navigation
|
||||||
|
||||||
| Search tags for this page |
2006 polaris ranger drive belt installaton information,how to install drive belt on 2007 polaris ranger,how to install drive belt on polaris ranger,how to put on drivebelt on 83 ford ranger,how to replace drive belt on polaris ranger,how to replace drive belt on polaris ranger 700,how to replace drivebelt on 500 polaris ranger,how to replace the drive belt on a2002 polaris 6x6,info about changing drive belt on polaris 400 ranger,polaris ranger 700 drive belt replacement,polaris ranger belt replacement,polaris ranger drive belt,polaris ranger drive belt installation,polaris ranger drive belt replacement,replace drive belt on polaris ranger 700
Click on a term to search for related topics.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Surfing behind Thumb Drive controlled drive-by-wire Polaris RZR Video #2 | designabilityinc | Full Size Ranger Photos | 2 | 11-26-2009 12:41 PM |
| Surfing behind Thumb Drive controlled drive-by-wire Polaris RZR | designabilityinc | Full Size Ranger Photos | 0 | 09-04-2009 08:54 PM |
| Installing HD Coil Spring for Snow Plow | caglezxj | Full Size Ranger Discussion | 5 | 12-17-2008 10:48 PM |
| Drive belt | disturbed | Modified Tech Discussion | 2 | 11-06-2008 09:55 AM |
| Installing HID Lights in a RZR | caglezxj | Polaris RZR Forum Discussion | 6 | 09-12-2008 01:22 AM |
Linear Mode
