Polaris Ranger Forum - Header Left   Polaris Ranger Forum - Header Right

ranger canvas doors

This is a discussion on ranger canvas doors within the General Discussion forums, part of the Polaris Ranger Forum category; How durable are the canvas doors for the rangers?...

Go Back   RangerForums.net - Polaris Ranger Forum > Polaris Ranger Forum > General Discussion

General Discussion Talk about anything here.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 05-05-2011, 08:15 PM   #1
Junior Member
 
ranger3139's Avatar
 
Join Date: May 2011
Posts: 19
ranger canvas doors

How durable are the canvas doors for the rangers?
ranger3139 is offline   Reply With Quote
Remove Ads
Old 05-05-2011, 10:19 PM   #2
Senior Member
 
Russ Chastain's Avatar
 
Join Date: Mar 2011
Posts: 1,526
Don't know, but I have a brand new set of OEM Polaris doors which my buddy gave me. I don't think I will use them because it requires a lot of velcro to be stuck to the machine, and it looks like you have to un-velcro them to get in and out. They look pretty durable. Don't know what they're worth but I'd sell them if anybody's interested.

Hope it's okay to mention this here instead of in the For Sale section.
Russ Chastain is offline   Reply With Quote
Old 05-06-2011, 12:42 PM   #3
Junior Member
 
ranger3139's Avatar
 
Join Date: May 2011
Posts: 19
Quote:
Originally Posted by Russ Chastain View Post
Don't know, but I have a brand new set of OEM Polaris doors which my buddy gave me. I don't think I will use them because it requires a lot of velcro to be stuck to the machine, and it looks like you have to un-velcro them to get in and out. They look pretty durable. Don't know what they're worth but I'd sell them if anybody's interested.

Hope it's okay to mention this here instead of in the For Sale section.
Will they fit a 400 and how much are you asking for them?
ranger3139 is offline   Reply With Quote
Old 05-06-2011, 01:54 PM   #4
Senior Member
 
Russ Chastain's Avatar
 
Join Date: Mar 2011
Posts: 1,526
I don't know what they will fit. His is a 2001 Series 10 (500 4x4) and they look like they will fit my 2006 500 4x4. We held them up and they looked like they would work. I don't know how that compares with a 400. ?? Do they use the same bodies and cages on 400s and 500s? Don't know.

Not sure what to ask, guess I need to look around and see what they go for and then discount that price. I'll check around and see.
Russ Chastain is offline   Reply With Quote
Old 05-08-2011, 11:58 AM   #5
Senior Member
 
Russ Chastain's Avatar
 
Join Date: Mar 2011
Posts: 1,526
Okay, they are in pretty good shape. The Velcro has never been used. It's the high-quality 3M stuff and the backing has never been peeled off. But they are old, so I'm not sure how well it would stick. Probably okay, but no guarantees.

They have no framework around the outside. Just a couple round fiberglass rods that criss-cross on the bottom half to stiffen it.

The windows unzip. The doors are held to the body and the roll cage via velcro and snaps. Each one has 3 snaps that snap to the body at the forward side of where your feet go in.

Included are the original 6 screws with snaps built on, for those snaps to attach to.

There are two small tears in the fabric of the driver's side door. One is very small and the other one is roughly an inch long. They were there when I got the doors.

The guy I got them from has a 2001 500 4x4 Series 10 Ranger. The doors were bought new for that machine by its original owner, but never used. They look like they would fit fine on my 2006 500 4x4.

See photos which I will try to attach. Right now I'm asking $100 plus shipping, which I will try to keep as low as possible. Might take two packages because of the long fiberglass rods. Might send those in a tube and box up the doors separately.

I uploaded 5 pics with this post. I will try to upload the other 3 files in another post.
Attached Images
File Type: jpg doors01w.jpg (96.6 KB, 7 views)
File Type: jpg doors02w.jpg (67.7 KB, 5 views)
File Type: jpg doors03w.jpg (87.6 KB, 5 views)
File Type: jpg doors04w.jpg (82.6 KB, 7 views)
File Type: jpg doors05w.jpg (69.4 KB, 4 views)
Russ Chastain is offline   Reply With Quote
Old 05-08-2011, 12:00 PM   #6
Senior Member
 
Russ Chastain's Avatar
 
Join Date: Mar 2011
Posts: 1,526
Here are the other 3 pictures.
Attached Images
File Type: jpg doors06w.jpg (44.2 KB, 3 views)
File Type: jpg doors07w.jpg (72.7 KB, 3 views)
File Type: jpg doors08w.jpg (98.1 KB, 3 views)
Russ Chastain is offline   Reply With Quote
Reply

Lower Navigation
Go Back   RangerForums.net - Polaris Ranger Forum > Polaris Ranger Forum > General Discussion


Search tags for this page
2011 polaris ranger doors
,

canvas doors for polaris ranger

,
doors for 2011 polaris ranger
,
how do you put doors on polaris on 05 ranger 500
,
how to make ranger doors
,
polaris ranger 400 canvas doors
,
polaris ranger 400 doors
,

polaris ranger canvas doors

,
polaris ranger doors
,

polaris ranger doors canvas

,

polaris ranger doors for sale

,
ranger 500 efi canvas cab installing doors
Click on a term to search for related topics.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do it yourself doors Ranger 800 xp? SteelerChris Full Size Ranger Discussion 3 09-08-2011 11:30 PM
Pro Armor Ranger Doors KB Motorsports KB Motorsports 0 01-22-2011 10:49 AM
Ranger XP Doors? Crimepays General Discussion 1 12-20-2010 03:15 AM
Ranger Steel Cab Doors harrah73 Full Size Ranger Discussion 1 03-05-2010 12:34 PM


All times are GMT -5. The time now is 12:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.