|
|
This is a discussion on 2005 Ranger 4x4 won't go into high while running within the Modified Tech Discussion forums, part of the PRF Tech Forums category; 2005 Ranger 500 4x4 won't shift into high when running (almost engages but just scrapes gears). Will go into high before starting engine and works ...
|
|||||||
| Modified Tech Discussion Tech Related Discussion for Ranger & RZR's |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
01-24-2009, 08:06 PM
|
#1 |
|
Junior Member
Join Date: Jan 2009
Posts: 5
|
2005 Ranger 4x4 won't go into high while running
2005 Ranger 500 4x4 won't shift into high when running (almost engages but just scrapes gears). Will go into high before starting engine and works fine. Goes into L N and Reverse when running. Any ideas would be much appreciated! Thanks
|
|
|
 |
|
02-01-2009, 09:56 AM
|
#2 |
|
Junior Member
Join Date: Dec 2008
Posts: 8
|
Re: 2005 Ranger 4x4 won't go into high while running
Hmm...
It sounds like perhaps your shifter is out of alignment or you have something in there bent? I'm assuming the grinding noise is simply your gearbox not fully engaging into high gear. I don't know alot about these things I have had mine only a short time but maybe at least its something to check out?  Hope this helps!!
__________________
People try to hate me and discriminate me, because I still fly the flag my great great Grandpa did. Ive got an X and 13 stars flapping out in my front yard. That makes me a racist? That's what the ignorant said.... |
|
|
|
|
02-01-2009, 07:38 PM
|
#3 |
|
Junior Member
Join Date: Jan 2009
Posts: 5
|
Re: 2005 Ranger 4x4 won't go into high while running
Thanks for the idea Gearsnatcher,
The idle was too high, could not get it to idle down with the adjustment screw. Had an air leak in the rubber intake boot, tightened up the boot clamp and a couple of other clamps and adjusted the idle down to where it sounded like it was barely running, everything worked fine. |
|
|
|
|
Lower Navigation
|
||||||
|
||||||
| Search tags for this page |
2005 polaris ranger 500cc won't shift to high gear,gears grinding on polaris 6x6 2005 model,high gear out of polaris ranger,polaris 4x4 500 wont go into gear,polaris 6x6 wont shift,polaris 6x6 wont stay in gear,polaris ranger 2007 wont shift in gear,polaris ranger 700 wont change gears while running,polaris ranger won't shift while running,polaris ranger wont go in high gear,polaris ranger wont go into gear,polaris ranger wont go into high gear,polaris ranger wont shift,polaris ranger wont shift gears when on,polaris ranger wont shift into high
Click on a term to search for related topics.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2005 ranger 700EFI 6x6 wont stay running | jsimmons33 | General Discussion | 2 | 03-05-2010 11:34 PM |
| 2008 Ranger running rough | nvwolfer | Full Size Ranger Discussion | 0 | 02-14-2010 02:31 PM |
| Need help - Rough running Ranger | 7lazy77 | Full Size Ranger Discussion | 4 | 11-26-2009 10:32 AM |
| What is high hours for a ranger? | skeetbass | Full Size Ranger Discussion | 2 | 09-11-2008 09:44 AM |
| 2004 Ranger 500 6x6 running rich | nomekennedys | Modified Tech Discussion | 2 | 05-16-2008 05:21 PM |
Linear Mode
