|
|
This is a discussion on new 400 ranger vibration noise within the Modified Tech Discussion forums, part of the PRF Tech Forums category; new 2011 400 ranger,vibration noise.has anybody had issues with this problem?...
|
|||||||
| Modified Tech Discussion Tech Related Discussion for Ranger & RZR's |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-27-2011, 02:21 PM
|
#1 |
|
Junior Member
Join Date: Nov 2011
Posts: 2
|
new 400 ranger vibration noise
new 2011 400 ranger,vibration noise.has anybody had issues with this problem?
|
|
|
 |
|
11-27-2011, 04:13 PM
|
#2 |
|
Junior Member
Join Date: Nov 2011
Posts: 1
|
vibration
I just got a ranger 400 a few days ago and noticed the same thing when I slow down and stop. It vibrates and then goes away after a few seconds
|
|
|
|
|
11-30-2011, 10:54 PM
|
#3 |
|
Junior Member
Join Date: Jul 2011
Location: Central Alberta
Posts: 24
|
My 2010 vibrates pretty good when there is nothing in the box. Has since new. 2 years later and 120 hrs it hasn't gotten any worse. Kind of anyoing. Get a little weight in it and it settles down though. If you have ever pulled the box off you would under stand. It bloody heavy and all that holds it down is the 2 hinges and 2 latches. Hard to keep it solid with the rest of the machine.
|
|
|
|
|
12-01-2011, 09:58 PM
|
#4 |
|
Senior Member
Join Date: Mar 2011
Posts: 1,078
|
Put some padding (like duct tape) on the bed latch and that should help.
|
|
|
|
|
04-15-2012, 09:02 PM
|
#5 |
|
Member
Join Date: Mar 2012
Posts: 33
|
I have a 2012 ranger 400 ho. It tends to make noise and vibrate, and a lot is coming from the bed. I opened it the other day and found that the lift cylinder was causing the majority of the vibration. There is a lot of slop in the pins on both ends. I am not using the bed much, so I pulled out the cylinder (easy two clips and two pins) and the the vibration from the back is gone. It has also made cleaning a bit easier, since the bed tips back a few inches further allowing better access.
|
|
|
|
|
Lower Navigation
|
||||||
|
||||||
| Search tags for this page |
2011 polaris ranger vibration noise,2012 polaris ranger 400 problems,2012 polaris ranger 400 vibrates,anybody have a polaris ranger 400,anybody have problems with the new 2012 ranger 400 polaris,discontinue of polaris ranger 400,how to stop vibration in a polaris ranger,polaris ranger 400 noise,polaris ranger 400 noise forums,polaris ranger 400 problems,polaris ranger 400 vibration,polaris ranger vibration,polaris ranger vibrations,ranger 400 modiications,vibration in a polaris ranger
Click on a term to search for related topics.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2012 HD vibration | farmrepair | Full Size Ranger Discussion | 21 | 03-01-2012 10:27 PM |
| Noise Reducing Muffler for Ranger | kdog | Modified Tech Discussion | 0 | 03-07-2011 07:08 AM |
| 2007 Ranger 500 EFI rear end or tranny noise | peterb | Modified Tech Discussion | 0 | 11-18-2009 02:57 PM |
| Need some help with a noise on my RZR | toybog | General Discussion | 3 | 02-28-2009 10:01 AM |
| Vibration and rattles | Britain22 | General Discussion | 6 | 01-04-2009 10:37 PM |
Linear Mode
