|
|
This is a discussion on Speedi Sleeve within the Modified Tech Discussion forums, part of the PRF Tech Forums category; I went to put new bearings in the front of my Ranger and the hubs are worn down. You can clearly see wear ridge wear ...
|
|||||||
| Modified Tech Discussion Tech Related Discussion for Ranger & RZR's |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-10-2011, 08:36 AM
|
#1 |
|
Senior Member
Join Date: Dec 2011
Posts: 228
|
Speedi Sleeve
I went to put new bearings in the front of my Ranger and the hubs are worn down. You can clearly see wear ridge wear the inner races ride in on them. Has anyone ever put a speedi sleeve on these hubs? I've used them for seals in the past but never a bearing surface. Is there a quality aftermarket supplier for these hubs? Looking at a $100 bill from Polaris, not the end of the world and they lasted over 10,000 miles. On second thought, I'll just get some Polaris ones.
__________________
2008 Ranger Crew 700 Limited Edition 10,000 miles and counting 
|
|
|
 |
|
Lower Navigation
|
||||||
|
||||||
| Search tags for this page |
polaris speedy sleeve,speedy sleeve for atv
Click on a term to search for related topics.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
