Four wheel drive in revers

Iman · 01-07-2012, 01:15 PM

I have a 2007 ranger 700efi browning edition the four wheel drive will engage after the rear wheels spin a couple revelutions even if the switch is in 2wheel drive and the four wheel drive will not inguage in reverse any help would be greatly apreacted.

wildbill23c · 01-08-2012, 05:08 PM

Sounds like a bad actuator and/or switch. Can't forsee anything mechanical that would cause something that's in 2WD mode to just switch itself into 4WD given the system is electronically operated with a switch on the dash. Might be a short in the actuator or switch that's receiving just enough power from the short to engage the 4WD, my question is why only in reverse though.

01-07-2012, 01:15 PM	#1
Iman Junior Member Join Date: Jan 2012 Posts: 1	Four wheel drive in revers I have a 2007 ranger 700efi browning edition the four wheel drive will engage after the rear wheels spin a couple revelutions even if the switch is in 2wheel drive and the four wheel drive will not inguage in reverse any help would be greatly apreacted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
three wheel drive	reggie	Full Size Ranger Discussion	3	10-14-2011 07:57 PM
6 x 6 - 2 wheel drive question	danr1707	Full Size Ranger Discussion	5	03-10-2010 07:03 AM
Surfing behind Thumb Drive controlled drive-by-wire Polaris RZR Video #2	designabilityinc	Full Size Ranger Photos	2	11-26-2009 12:41 PM
2008 RZR 4 Wheel Drive Problem - HELP	cdsumm	Polaris RZR Forum Discussion	1	03-19-2009 05:06 PM
AWD, All Wheel Drive, how does it work?	GRAZOR	General Discussion	10	02-11-2008 09:37 PM

Four wheel drive in revers

polaris no four wheel drive reverse

where is the 4 wheel drive actuator located on a polaris ranger

01-08-2012, 05:08 PM	#2
wildbill23c Senior Member Join Date: Jan 2012 Location: Emmett, Idaho Posts: 180	Sounds like a bad actuator and/or switch. Can't forsee anything mechanical that would cause something that's in 2WD mode to just switch itself into 4WD given the system is electronically operated with a switch on the dash. Might be a short in the actuator or switch that's receiving just enough power from the short to engage the 4WD, my question is why only in reverse though.