RangerForums.net - Polaris Ranger Forum

RangerForums.net - Polaris Ranger Forum (https://www.rangerforums.net/forum/)
-   Polaris Ranger XP900 (https://www.rangerforums.net/forum/polaris-ranger-xp900/)
-   -   Drain Plug Seals (https://www.rangerforums.net/forum/polaris-ranger-xp900/45435-drain-plug-seals.html)

bill winney 05-01-2019 02:12 PM

Drain Plug Seals
 
Anyone know the size of the O-Rings & copper seal for the drain & fill plugs on the Front drive, transmission/differential, & engine.
Is there a source for a kit with these?
Many thanks...

CCRay 05-09-2019 04:51 PM

If you are careful and wipe these clean by removing the copper washer and washing the plug and washer with Windex making sure to remove any foreign matter, and wipe the plug mating surface on the block/rear end/front end, You can re-use these several times without any leaks. Just don't over-torque them. I do this on my cars as well, even though I have a bag of new washers in the cabinet.

bill winney 05-12-2019 10:14 AM

I'm up to the "re-use several times" point and probably need to replace them. So any info on source, sizing, etc, would be great if anyone out there has info.

CCRay 05-13-2019 01:01 PM

I was just on Partzilla and they have washers specifically for each plug.

bill winney 05-22-2019 07:55 PM

K, many thanks...


All times are GMT -5. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome