I have a 2017 ranger 1000 xp. The fuel pump is not getting power. I replaced the relays and fuses. I replaced the ignition switch and the tmap sensor. If I jump power to the pump it works and will start. But it isn’t getting power sent for some reason. Does anyone have any other ideas?
I have a 04 ranger 500 that will not run wot with air filter or breather tube on and then when it knocks of I have to let it sit around 20min before it will start back up any help will be appreciated thanks
i have a 2004 ranger 4x4 . have to keep cranking , starter shuts off and then try again. choke will not stay pulled out, keeps going back to no choke position. seems like it is starving for fuel, but i have fuel. spark plug indicated a rich mixture, but no way to adjust mixture. any ideas?