Polaris Ranger Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Polaris Ranger XP900
    When starting the buggy first thing each morning a squacking noise is heard until it starts. Doesn't do it after warmed up. Anyone have an answer as to cause/solution to this problem? 2015 XP900 Thanks
  2. Polaris Ranger 500
    2018 Polaris Ranger 500 SxS wont start. Ticking when key is turned on before ignition engaged. Look at the video >> << for the sound of the ticking -- it happens when key is on before I turn it. New battery, enough power to turn over engine but wont go. Gas tank full, electrical connections...
  3. Polaris Ranger 6X6
    Can anyone give me a clue on the difficulty of changing the starter Bendix on a 99 6x6 ? Have an old manual, but it doesn’t really show a break down of procedures. Thanks !!
  4. Polaris Ranger XP900
    2015 Polaris Ranger XP900. After about a hundred operating hours, found the starter-motor running after ignition turned off. The motor finally quit after presumably burning out. After the dealership replaced it, found that it now sometimes takes two to four tries with the ignition switch to...
  5. Full Size Ranger Discussion
    I have an 04 4x4 with a Warn z3500 winch. For a while now there has been problems starting. When I turn the key there is no noise, clicking, anything, but the lights will come on. The battery is newish. I just figured it was something electrical because weird solutions tended to make it work...
  6. Polaris Ranger 6X6
    I have a 6X6 that has been cutting out. It usually happen by the time I get to the back of my property and I have to walk all the way back. Symptoms: -When it dies the neutral light is not glowing (Yes, it is in neutral). -After a while I turn on the ignition and the green light is back on...
  7. Modified Tech Discussion
    I have a 2000 6X6 that has stopped starting. (How's that?) I want to remove the starter but find nothing in this forum and my service manual simply says "remove the two bolts". I can't even SEE the bolts, which appear to be hidden behind that big plastic cover on the left side. Do I really have...
  8. Full Size Ranger Discussion
    I need some help with replacing a starter motor on a 2003 Ranger Series 11. Will I have to remove the Clutch engine cover plate in order to get the lower Starter mounting bolt? If so, can somebody please tell me how to remove the clutch pieces that I need to remove? Pictures would be a huge...
1-8 of 8 Results
Top