Polaris Ranger Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
It was my understanding from Polaris if you use rear factory plug instead of taking apart
and wiring to rt rear tail light assembly..that when you put in reverse... light you installed
on the after market Sautvs Rear bumper w LED /light automatically comes on.
 

· Registered
Joined
·
21 Posts
My experience (as well as others) with the plug and play reverse lights-
They do come on and function in reverse.
However, they "glow" when not in reverse.
I used a std bosch type relay to isolate the current so the light is actually off.
Pretty simple, required no additional wires to be run. But I'm pretty proficient with 12v wiring.
 

· Registered
Joined
·
55 Posts
Discussion Starter · #3 ·
My experience (as well as others) with the plug and play reverse lights-
They do come on and function in reverse.
However, they "glow" when not in reverse.
I used a std bosch type relay to isolate the current so the light is actually off.
Pretty simple, required no additional wires to be run. But I'm pretty proficient with 12v wiring.
Thank for your advisement...when I go to auto Zone what bosch type part or relay. This may appear as a stupid question..but
does relay go before or after Polaris plug in rear or does it go from plug to the bumper lite -
 
1 - 9 of 9 Posts
Top