Polaris Ranger Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
HAS ANYONE ELSE PURCHASED A POLARIS FRONT BRUSH GUARD FOR A RAZOR AND HAVE IT NOT FIT? THE BOLTS ON THE BOTTOM DONT LINE UP.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #3
FINALLY GOT MINE YOU JUST HAVE TO MUSCLE UP ON IT A LIL BIT. WHAT WORKED FOR ME WAS TIGHTENING THE FRONT BOLTS ALL THE WAY AND THEN PUSH THE BOTTOM SO THAT YOU CAN GET A SCREW DRIVER OR SOMETHING IN ONE OF THE HOLES AND THAT SHOULD HELP TO GET YOU LINED UP ON THE OTHER SIDE. IT HELPS IF YOU HAVE SOMEONE TO HELP YOU. LET ME KNOW HOW IT GOES.
 

·
Registered
Joined
·
635 Posts
I self installed both sets of guards on both RZR's and the only thing I remember was the two front self tapping bolt/screws were a bear, I had to use a cordless drill on slow and push like a mad man to get them to tap..


[attachment deleted by admin]
 

·
Registered
Joined
·
563 Posts
Just a comment on the self tapping screws. Buy some replacement self tapping screws from a hardware store,
they go on and start real easy. The bottom bolts were the hardest part for me.
 
1 - 6 of 6 Posts
Top