Polaris Ranger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I just bought this from Polaris directly for controlling my plow blade through the winch to raise and lower the blade/winch. I spoke to them on the phone to make sure it would work and not affect the remote control operation. They confirmed. I'm hooking it up but cannot figure out how it actually connects to the winch.... there are 2 harnesses that are left at the end of the main harness but nothing to plug them into. Seems like a plug to the winch harness is missing or something....Any help would be appreciated! (2019 Ranger 1000 Northstar)
 

·
Registered
Joined
·
21 Posts
i would like to know how this works out for you and see your switch controler. i had mine installed and the angle is on the pistol controler but i still have to use the keyfob to raise lower the blade. in your situation you probably need to control the raise lower with a relay.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
So I called them and they told me I need the harness for it to work with the winch.
Power Controller Winch Adapter Wiring Harness
Part #: 2884159
Waiting for it to arrive to see if this works or not.
I am using this controller
Glacier Plow System Power Controller
Part #: 2883247
Qty: 1
 
1 - 3 of 3 Posts
Top