Polaris Ranger Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I am in the process of building my own heater/blower unit, as I'm fedd up with the cab fogging up when I get in it wet, so to all the guys that have fitted heaters, where do you connect in to the water system?

I am running a 2015 diesel and when I take the under tray off, looking up at the front of the engine, there is a rubber hose running from the bottom of the t stat housing to the cold radiator ruturn hose, I'm thinking this is the run around circuit for the engine when the t stat is closed, so am wondering if this would be a good place to tap into for heat as it will get hot sooner, than if i tapped in to the hot radiator hose.
 

·
Registered
Joined
·
22 Posts
That is the correct way to tap inn for better heating. How are you going to turn the heater off in the summer?
 
1 - 2 of 2 Posts
Top