Polaris Ranger Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
We have a Polaris Ranger 400 4x4 and selecting gears has been getting harder and until yesterday we lost normal drive.... we have everything in 4 wheel drive but nothing in normal drive . We have checked clutch belt and seem fine all looks to be working ok , drive shaft spins but wheels don't engage .Any ideas on what we should look for .Have taken off gear selector and all seems ok behind there .? Hubby would like to try fix it himself if possible but this is our first atv and don't know our way around them .
 

·
Super Moderator
Joined
·
2,366 Posts
Jack it up with the rear tires off the ground and put it in park and check the rear axle cv joints to make sure one isn't broken.
You shouldn't be able to turn either tire.
If the cv joints are good and either or both tires will turn you have an internal transmission problem.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Hi mate thanks heaps for that .... so we jacked it up and put it in park and both wheels turn and they turn is all gears too ... so I am presuming we will have to take the tranny out and have a look yeah 🙃
 

·
Registered
Joined
·
37 Posts
Could be the transmission or it could be both rear axle CV joints.
Most likely a broken rear drive chain in the transmission.
 
1 - 4 of 4 Posts
Top