Polaris Ranger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Just looking for a little advice from people. I have a 2011 Ranger 500. I has a glacier II plow mount and a 5' plow on it. I plow a real steep driveway and when I go down the hill the frame drags and keeps the blade from keeping in contact with the road.

I called the dealer and they said they were aware of the issue and the Polaris had just used a real poor design with the Glacier II. I was wondering if it was worth contacting Polaris to see if there is anything I can do the fix it or if I need a new mount/frame.

Any advice would be appreciated.

Thanks
 

·
Registered
Joined
·
308 Posts
I have the same machine and plow. These will work and are relatively cheap. Crank them up when you add the plow and you can crank them down for normal riding. I had these on my machine but went with a lift kit on all four corners so I removed them and sold to another member.

Polaris Sportsman Suspension Pre Load Adjuster Springs Front | eBay

I know it does not say they fit the Ranger, but they will and work great.
 

·
Registered
Joined
·
308 Posts
Here is a picture of mine cranked up 1/2 way

 
1 - 3 of 3 Posts
Top