Polaris Ranger Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 2019 Ranger 900 XP. I washed it this morning and started it to put back in shed. It started fine. Drove it 20-30 feet and it went dead. There is no power at all to the dash panel. I check voltage on battery. Appeared to be good. Checked fuses under the seat. Seem to be good. Is there some other fuse panel on this Ranger. I took the front plastic hood off. I. see a solenoid in front. I have power on one of those wires. Any advice would be helpful.
 

·
Registered
Joined
·
8 Posts
Just posted similar issue with my 570 Ranger. I thought I had a good battery as well. I put a volt meter on it and I only got 6 volts. The ECM on the machine needs to see a higher voltage before it will light up the dash and allow you to start. I put a new battery in and it is now fine.
 
1 - 2 of 2 Posts
Top