[Atomic Shocker]

Has anyone found some good references for this? Do I need to remove the ride command to get access to the switch cluster underneath?

thanks

 

[KC Ranger Ulti]

Has anyone found some good references for this? Do I need to remove the ride command to get access to the switch cluster underneath?

thanks

Yes, It comes out real easy.

 

[Gerb4653]

No there are two push darts at the bottom of the switch panel. Pull out from the bottom and the tabs on the top should release. Very easy to remove.

 

[SUtahMapper]

No there are two push darts at the bottom of the switch panel. Pull out from the bottom and the tabs on the top should release. Very easy to remove.

Absolutely the easiest cluster removal. By the way, third party switches will not fit snuggly in the holes. You will need an adapter from your dealer. Polaris wants you to use their switches. What BS.

 

[Atomic Shocker]

Absolutely the easiest cluster removal. By the way, third party switches will not fit snuggly in the holes. You will need an adapter from your dealer. Polaris wants you to use their switches. What BS.

ah crap! Thanks!

 

[dclifton]

I think im about to move some of my switches around if i have enough wiring. I have winch control and headlights on the left.

hill control, 4wD and Tuning switch on the right. I would really like to put all my lights over in the middle. I hate the hill descent thing being in the middle. Anyone tried moving these around yet?