transmission

1 - 1 of 1 Posts

Shinnyboots65

Registered

Joined Apr 22, 2019

2 Posts

Discussion Starter • #1 • Apr 22, 2019

good afternoon folks new to the forum got a question can anybody tell me how to get the shaft out of the shifter housing on a 02 ranger 6 x 6 is it pressed in mine is froze up or can anyone tell me where to buy the whole ass.thanks in advance

1 - 1 of 1 Posts

Recommended Reading

Now it's on to - best drive belts for the $$? (2014 6x6)

Polaris Ranger 6X6

Parts are coming in, and stuff is getting slapped together. I'm about to get into the front of the machine - trans, clutches, engine, front end. Since I'd lay money that this is the original belt in it, even if it's still decent I'd like to at least carry a spare on the trail. Any suggestions...
- 4
- 133
- Czechsix · updated 1 mo ago
2001 6x6 needing parts

Polaris Ranger 6X6

I have a 2001 Polaris Ranger 6x6 and need a few parts, but just found out these parts are discontinued so was wondering if anyone had any thoughts on where to look. I need 3233561 (handle) and 3233083 (centering spring). I tried everyone online but no luck. Thanks!
- 3
- 393
- Josh73 · updated 1 mo ago
RANGER 6X6 MIDDLE DIFFERENTIAL

Polaris Ranger 6X6

Can anyone tell me whether the middle diff of the 500 and 800 Ranger 6x6 are compatible? I am buzy converting on of my XP 800's to 6x6.
- 1
- 167
- S
  seanvoda · updated 1 mo ago
Fuel pump quits

Polaris Ranger 6X6

I have a 2003 Ranger, series 11, carbed, with external fuel pump. "Junior" ran great until this spring. The fuel pump stopped operating: ie, didn't prime when ignition was turned on. Wanting to save some money, I opted for an aftermarket pump. It worked for about 2 weeks, and then exhibited the...
- 6
- 8K
- J
  jbettner · updated 2 mo ago
Current best go-to for CV joint rebuild kits, parts, etc?

Polaris Ranger 6X6

Time to rebuild, and of course replace some parts like the frigging spring clip on the inner rear cups that are trashed. Is stock my best bet, or are there other options out there that are heavier duty? If there are better options, any suggestions on manufacturers or vendors that'll carry the...
- 4
- 251
- Czechsix · updated 2 mo ago