Polaris Ranger Forum banner
21 - 22 of 22 Posts

·
Registered
Joined
·
168 Posts
Unplug the switch and run the test again, just to see if the relay activates with key power. It appears that the relay is working, but further testing and documenting is required to know if that is the intended function or if something is wrong.



How confident are you that the relay is wired to be constantly on with key power and tripped off with the switch? What leads you to this confidence, experience, documentation, you have the same setup, etc.?
Its how a relay works…. There is nothing wrong with his relay is what i was referencing… he needs to put 12V to the wiper motor as its most likely the issue all signs point to it especially it being hot. He could also OHM test it and it will undoubtedly be an internal short
 
21 - 22 of 22 Posts
Top