Firstly what screen is it?? Fixed or tip-out?

If it's fixed screen, are the hinge holes blocked and sealed off.

The fixed screens also can leak from the top seal against the frame, something in manufacturing is off and the glass and metalwork curves don't match, leaving a gap in the middle on some. Either add extra sealing strip or mastik the top edge.

But also check it's not coming in via the wiper motor, the external plastic trim isn't sealed and water collects behind it and ends up coming in the hole the wiper passes through.

 

My tip out leaked at the top corners. I added some sticky back neoprene pieces at the corners and stoped it. My windshield wiper drips in a hard rain. Haven’t figured that one out yet.

I just tell myself it’s not a truck. It’s going to leak and get dust in it.


Sent from my iPhone using Tapatalk

 

It’s the front window that tips out the top of the window leaks and then when I use the window washer fluid comes out from the top rail

 

Take it to to your dealer. There was an update from Polaris on the leaking windshields. They added a couple of new seals to the frame. Might want to give them a heads up so they can make sure to have parts onhand though.

 

Check the fluid hose under the headline. It’s probably loose.

 

i think i figured out my problem , when i had the tilt out window installed it called for 2 pads/stickers to be placed at the top left and top right, i think that those two pads gave enough clearance for the water to come in the window. going to remove them when i get finished with the lift install and shocks