[KingNothing]

thanks...but im wondering if that is a difference between model year 2014 570 vs 2015 570. if you happen to have a pic of the fittings on the sway bar location, send them my way, as I am unable to see that on my 2014 570.

My 2015 ETX has the same 13 fittings that you describe, I don't see any on the sway bar either.

 

[KingNothing]

The two points where the sway bar is attached to the frame each have a fitting for a total of 15.

DogRunner, you are absolutely correct! There is one on each side, pointing forward toward the shock absorber. I kept looking for them to face rearwards.

Here is a pic of mine on the drivers side.

 

[KingNothing]

DogRunner, you are absolutely correct! There is one on each side, pointing forward toward the shock absorber. I kept looking for them to face rearwards.

Here is a pic of mine on the drivers side.

I would take another picture for you rangerrappo, but my polaris is currently at my deer lease.

Maybe this will help:

In the picture above, I am looking over the top of the left rear tire, behind the shock is the fitting.

Or, look at the polaris from the rear, and you will see the sway bar above the lower a-arms, in between the tires. This bar attaches to the frame on each side through a semi-circular clamp with a rubber bushing inside. The clamps are attached to a rectangular plate on the frame, and on this plate are the fittings, pointing toward the front of the polaris.

Hope this helps

 

[KingNothing]

Nice Catch KingNothing! I just looked at mine, and sure enough, I have two additional fittings right where you mentioned. It's called the Rear Stabilizer bar and their is a left and a right pivot fitting. I will update this forum appropriately from my previous count of 13. thanks again!

Glad I could help.